2 Xerox LS Duplicator
Or, you can choose to enter the desired
number of copies for this job by following
this simple procedure:
a
Press the up or down button to
following screen:
b
Then press the >> button to submit,
and you should see the following
Specify Counter screen:
c
Please refer to the “Input Name and
Number” section of “Chapter 2:
Getting to know your Duplicator” to
enter the desired amount . Then press
the >> to continue on to the next step .
Step 4:
Once the Counter selection is
submitted, you shall see the following
Preparation screen and the corresponding
trays that do not contain disc(s) in them will
automatically be ejected:
Step 5:
After you’ve placed your blank discs
into the drives, please allow 5-10 seconds
for the duplicator to detect them . After they
have been recognized, you shall see the
following screen:
The “7” indicates there are seven discs
recognized by the Writer. Actual quan-
tity may differ depending on the size of
your machine or the number of discs you
inserted.
•
Counter:
Specify Counter
Specify Counter
[ ] OK?
Preparing
Waiting for Blanks
Preparing
7 Discs Detected, Go?
If the above screen is displayed
for more than 2 minutes after
you have inserted your blank
discs, please check the quality
of the discs.
By default, the “Auto Start” set-
ting is set to “Auto”. Therefore,
if your duplicator is not com-
pletely filled with blank discs
and there is no activity within
30 seconds, or if all writers are
filled and the duplicator detects
this, the duplicator will start
automatically.
Note
Note
