Xerox DocuPrint P8E Скачать руководство пользователя

Страница: 77 / 150

7/98

Xerox DocuPrint P8e Service Manual

5-5

General Procedures and Information

5.2 Printer Operations

5.2.1 Control Panel

The Control Panel (Figure 5.2.1) is located on the right forward corner of the Front Cover Assembly. The

Control Panel includes a single On/Off-line button and three indicator LEDs.

The On/Off-line button has multiple functions that enable the user to select the desired operation.

The three Indicator LEDs: red (Error), amber (Paper), and green (Ready). These LEDs indicate the

printer’s status. (More detailed information about printer status is available through the Status Monitor
software utility.)

Figure 5.2.1 Control Panel.

The table below provides various LED conditions and describes their significance.

Indicator

Description

Error LED (on)

There is no print cartridge.
The cover is open.
There is a paper jam (if the Paper LED is on).
Other error condition.

Error LED (blink)

Printer memory is insufficient for print job.

Paper LED (on)

The paper tray is empty.
There is a paper jam (if Error LED is also on).

Paper LED (blink)

The printer is on manual feed mode (push On/Off-line
button to feed paper from manual feeder).

Ready LED (on)

The printer is ready to receive and process data.

Ready LED (blink)

The printer is receiving or processing data.

Ready LED (off)

The printer is offline

All LEDs (blink)

Possible printer failure.

Error LED

Paper LED

Ready LED

On/Off-line
Button

sm5_007a

Содержание DocuPrint P8E























































































































































Результаты поиска

Содержание DocuPrint P8E

Отзывы:

Похожие инструкции для DocuPrint P8E

Бренды по названию

Популярные бренды

Xerox DocuPrint P8E, Руководство по обслуживанию

Результаты поиска

Содержание DocuPrint P8E

Отзывы:

Похожие инструкции для DocuPrint P8E

Бренды по названию

Популярные бренды