Xerox DocuPrint P8E, Руководство по обслуживанию

Страница: 3 / 150

3/99
Xerox DocuPrint 4508 Service Manual iii Product Safety
Warning
This equipment complies with the
requirements in Part 15 of FCC rules for a
class A computing device. Operation of the
equipment in a residential area may cause
unacceptable interference to radio and TV
reception, requiring the operator to take
whatever steps are necessary to correct the
interference.
Product Safety
Electrostatic Discharge
This caution indicates that there are components
which are sensitive to damage caused by
electrostatic discharge.
Shock Hazard
This symbol indicates the presence of potentially
hazardous voltages.
CLASS 1 LASER PRODUCT
The Xerox DocuPrint P8e laser printers are
certified to comply with Laser Product
Performance Standards set by the U.S.
Department of Health and Human Services as a
Class 1 Laser Product. This means that this is a
class of laser product that does not emit
hazardous laser radiation; this is possible only
because the laser beam is totally enclosed during
all modes of customer operation.
The laser and output of the laser scanner unit
produces a beam that, if looked into, could cause
eye damage. Service procedures must be
followed exactly as written without change.
When servicing the machine or laser module,
follow the procedures specified in the manual and
there will be no hazards from the laser.
Laser (FDA): Any laser label visible to service
must be reproduced in the service manual with
location shown or indicated. Safe working
procedures and clear warnings concerning
precautions to avoid possible exposure must also
be included.
The Laser contained in the DocuPrint P8e meets
the following standard: Laser class 3B, maximum
5mW, wavelength 780nm.
The following LASER symbol will be displayed at
the start of any procedure where possible
exposure to the laser beam exists.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
Each P8e laser printer has the following laser
warning label on the Laser Assembly.
DP8_001
DP8_006
DP8_009
CAUTION
These components are susceptible
to electrostatic discharge. Observe
all ESD procedures to avoid
damage.