Xerox DocuPrint P14, Руководство пользователя

Страница: 93 / 133

Solving Print Quality Problems
Chapter 5: Troubleshooting
❖
5-15
Table 5.2 Print Quality Problems
Problem Possible Cause Remedy
Irregular faded
patches of print There is a paper quality
problem. Use only paper that meets the specifications
required by the printer.
Toner may be unevenly
distributed. Remove the laser print cartridge and shake
it gently to evenly distribute the toner. Then
replace the cartridge back into the printer.
Black staining There is a paper quality
problem. Use only paper that meets printer
specifications.
A laser print cartridge from
another printer has been
installed. Always use the same laser print cartridge
with the same printer. Using a cartridge that
has already been used in another printer
may not give satisfactory results.
The printer’s OPC drum may
need to be cleaned. Press and hold the control panel button for
ten seconds until all lights blink, then let go
of the button. The printer cleans the OPC
drum automatically. After cleaning, one
cleaning sheet prints.
Character voids The paper may be too dry. Try printing with a different batch of paper.
Background
scatter The paper may be too damp. Try printing with a different batch of paper.
Do not open packages of paper until
necessary so that the paper does not absorb
too much moisture from the air.
Printing over uneven surfaces. If printing onto envelopes, change your
printing layout to avoid printing over areas
that have overlapping seams on the reverse
side.
Table 5.2 Page 1 of 2