Xerox DocuPrint N4025, Информационное руководство

Страница: 33 / 124

Setting DEFAULT GATEWAY at the Control Panel
Chapter 2: Connecting to Your Network
❖
2-19
Setting DEFAULT GATEWAY at the
Control Panel
1 Press Menu Up or Menu Down until you see:
M e n u s
E t h e r n e t M e n u
2
Press Item Up or Item Down until you see:
E t h e r n e t M e n u
D e f a u l t G a t e w a y
3 Press Value Up or Value Down . You will see:
D e f a u l t G a t e w a y =
x x x . x x x . x x x . x x x
4
Press Value Up or Value Down to change the value of the
character above the cursor. The value is incremented or
decremented by 1 each time the key is pressed. Holding
down
Value Up or Value Down causes continuous
scrolling through the values.
5
To change other characters in the Default Gateway
address, press
Item Up or Item Down to scroll right or
left respectively through the character string, then press
Value Up or Value Down to change the value of the
character above the cursor (as in Step 4).
6
When you have completed setting the Default Gateway
address, press
Enter . You will see:
E t h e r n e t M e n u
D e f a u l t G a t e w a y
7 Press On Line . You will see:
R e a d y
If you are using the Xerox CentreDirect External Print Server
(External Ethernet Adapter) to connect your printer to the
network, you cannot use the control panel to set a default
gateway. Use the telnet procedure that is described in the
section for Windows and Unix Operating Systems.