![background image](http://html.mh-extra.com/html/xerox/docuprint-n4025/docuprint-n4025_information-manual_885393027.webp)
Set An IP Address
Chapter 2: Connecting to Your Network
❖
2-13
Dynamic Addressing
(RARP/BOOTP)
The TCP/IP address is assigned automatically by the
Server. Follow the steps below:
1
Power on your DocuPrint network printer and allow time
for an IP address to be assigned by the RARP/BOOTP
server (this time may vary depending on network traffic).
2
Perform the steps contained in the section
“Print the
Configuration Sheet” (page 2-21)
.
3
Obtain the hardware and TCP/IP addresses from the
Configuration Sheet.
4
Update the RARP/BOOTP server’s /etc/ethers, and the /
etc/hosts files with a host name, TCP/IP and hardware
addresses. Consult your UNIX documentation for more
RARP/BOOTP server configuration details.
If you are using the Xerox CentreDirect External Print Server
(External Ethernet Adapter) to connect your printer to the
network, make sure the Adapter is powered on in addition to
the printer.
When the CentreDirect External Print Server acquires an IP
Address, the SYS LED blinks once per second. If the IP Address
is not set the SYSLED blinks 5 times per second.
Содержание DocuPrint N4025
