![background image](http://html.mh-extra.com/html/xerox/docuprint-n4025/docuprint-n4025_information-manual_885393034.webp)
Setting DEFAULT GATEWAY at the Control Panel
2-20
❖
DocuPrint Technical Information Guide
Setting from
Windows or Unix
Operating Systems
Perform these steps to enter the Default Gateway using
telnet from a Windows or Unix OS. Some DocuPrint
network printers do not support telnet. For these printers,
enter the Default Gateway from the Control Panel as
described in the previous section.
1
Open a telnet session.
Windows: Open a MS-DOS window, type
telnet
x.x.x.x[Enter]
, where
x.x.x.x
is the IP address
Unix: Type
telnet hostname
in a shell
2
Type
![Enter]
and then
yes[Enter]
to enter monitor mode.
3
Select the Network Protocols Menu,
N [Enter]
.
4
Select the TCP/IP Options Menu,
T [Enter]
.
5
Select the Engine Options Menu,
E [Enter]
.
6
Type
y [Enter]
.
7
Select Default router (gateway),
g [Enter]
.
8
Enter the new Default Gateway address,
[Enter]
.
9
Select
X [Enter]
to exit this menu or end the telnet
session.
Telnet only works if the device is on the same subnet as the
host (i.e. computer or workstation).
Содержание DocuPrint N4025
