Xerox DocuPrint N2125, Руководство системного администратора

Страница: 191 / 246

Control Panel Messages
Chapter 5: Troubleshooting
❖
5-7
Load MBF
Size and Type
Load paper of the size and type shown into the multi bypass feeder.
Load Tray 1
Size and Type
Load paper of the size and type shown into Tray 1.
Load Tray 2
Size and Type
Load paper of the size and type shown into Tray 2.
Load Tray 3
Size and Type
Load paper of the size and type shown into Tray 3.
Maintenance Kit
Replace
The fuser count has reached 200,000 sheets (at end of life). The printer
shuts down after the job. The printer will continue to print, but over time
print quality will deteriorate. Replace the maintenance kit and reset the
maintenance counter as per the instructions provided in the kit.
Manual Feed
Size and Type
Load paper of the size and type shown into the multi bypass feeder.
MBF Jam-
Remove All Paper
A paper jam has occurred while feeding from the multi bypass feeder.
Remove all paper from the multi bypass feeder, then refer back to the
Control Panel for further messages.
Memory Failure
Power Off/On
Controller memory has failed. Printing cannot resume. Power off and
power on the printer. If the problem persists, contact your service provider.
Menu Locked
Appears on the bottom line of the display when a selected menu is locked
by the network administrator using a PJL command. Users are prohibited
from making any changes to the configuration parameters in the menu.
Table 5.1 Control Panel Messages (continued)
Message Explanation/Corrective Action
Table 5.1 Page 4 of 8