Xerox DocuPrint IPS, Дополнительное руководство

Страница: 72 / 216

Printing using Xerox utilities and lpr utilities (DOS and UNIX)
3-22 Guide to Submitting Jobs from the Client
• -C“(format=<pdl>)”
Specifies the page description language (PDL) type of your
document. Accepted values are “ps” for PostScript, “ps1” for
PostScript level 1, “ps2” for PostScript level 2, “pcl,” “pcl5c,”
“pcl5e,” “ascii,” or “XGF/<ini-file>” for VIPP line-mode
initialization.
This option is necessary only if you want to force the printer
to interpret your document according to a specified PDL; for
example, you may want to print a PostScript document in
ASCII format.
NOTE: The DocuColor 2060 does not support printing of
color PCL jobs.
• -C“(halftone=<halftone>)”
Specifies the density of the halftone screen. Accepted values
are “defaultHalftone,” “coarse,” “medium,” “fine,” or
“extrafine.” The value “defaultHalftone” is equivalent to the
absence of the halftone attribute.
NOTE: Screen frequencies for the halftone attribute and the
default value vary depending on whether the job is black and
white or color, and on the resolution (300 or 600 dpi).
• -C“(hc=<color>)” (for models 4850/4890/92C only)
Specifies the highlight color. Valid options are “red,” “green,”
“blue,” “cyan,” “magenta,” “cardinal,” “royalblue,” “ruby,”
“violet,” or “black.” (Specifying black allows printing in gray
scale.)
If you want to change the highlight color used to print your
document, set the hc option to the color you want and set the
hcm option to “operator.”
If you set the hc option to a color other than the color loaded
at the printer and leave the default setting for hcm (“ignore”),
the hc option has no effect and the document prints using the
available dry ink.
See “Color mismatch” for more information on how the hcm,
hc, and mc options work together.