Xerox DocuPrint C6, Руководство пользователя

Страница: 69 / 78

61
The paper does not stack neatly in the paper
output shelf
Cause Suggested Solution
There is not enough clearance
above the paper output shelf. Place a sheet of paper in the
paper output shelf. Check the
clearance above the top of the
sheet; there should be two inches
of clearance.
The star wheel assembly bar is
disengaged. Open the printer cover. Reinstall
the star wheel bar by pushing
down on each end of the bar
until it snaps into position.
The star wheels are out of
position in the star wheel
assembly. Open the printer cover. Lift the
star wheel bar by grasping each
end of the bar and rotating it
toward the back of the printer.
Make sure the small wheels in
the star wheel assembly are not
pushed all the way inside the
rectangular slots and are able to
rotate freely. Then reinstall the
star wheel bar and close the
printer cover.