background image

70

6 Replacing Consumables

WARNING

• Use a broom or a wet cloth to wipe off spilled toner. Never use a vacuum cleaner for the spills. It may 

catch fire by electric sparks inside the vacuum cleaner and cause explosion. If you spill a large volume of 
toner, contact your local Fuji Xerox representative.

• Never throw a toner cartridge into an open flame. Remaining toner in the cartridge may catch fire and 

cause burn injuries or explosion.
If you have a used toner cartridge no longer needed, contact your local Fuji Xerox representative for its 
disposal.

CAUTION

• Never heat the drum cartridges or scratch their surfaces. It may cause health hazard.
• Keep the drum cartridges and toner cartridges out of the reach of children. If a child accidentally 

swallows toner, spit it out, rinse mouth with water, drink water and consult a physician immediately.

• When replacing the drum cartridges and toner cartridges, be careful not to spill the toner. In case of any 

toner spills, avoid contact with clothes, skin, eyes, and mouth, also avoid inhaling it.

• If toner spills onto your skin or clothing, wash it off with soap and water. 

If you get toner particles in your eyes, wash it out with plenty of water for at least 15 minutes until 
irritation is gone. Consult a physician if necessary. 
If you inhale toner particles, move to a fresh air location and rinse your mouth with water. 
If you swallow toner, spit it out, rinse your mouth with water, drink plenty of water and consult a physician 
immediately.

Handling Consumables

• Do not store consumables upright. 

• Do not unpack consumables/maintenance parts until they are ready to be used. Avoid storing 

consumables/maintenance parts in the following locations:
• in high temperature and humidity
• near heat sources
• in direct sun light
• in dusty places

• When using consumables, make sure to follow the precautions stated on their packaging. 

• We recommend you keep backup supplies of consumables. 

Recycling Used Consumables

Proper disposal is required for drum cartridges and toner cartridges no longer needed. Do not open drum 
cartridges, toner cartridges and waste toner bottle. Return them to your local Fuji Xerox representative.

Содержание DocuPrint C2255











































































































Отзывы: