Xerox DocuPrint 96, Руководство оператора

Страница: 49 / 548

SYSTEM OVERVIEW OF THE XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE 1-17
Optional printer components
This section describes the following optional printer components:
•
Feeder/Stacker
•
Bypass Transport Module
•
Input enablement device
Feeder/stacker
Figure 1-15 illustrates the Xerox DocuPrint 96/DocuPrint 96MX with
the optional inverter feeder stacker. The feeder/stacker contains a
high capacity feeder and a high capacity stacker. These devices
have the same functions as the feeder and stacker contained in the
inverter-feeder/stacker.
Figure 1-15. Printer + Inverter Feeder Stacker + Feeder Stacker
Bypass Transport Module
The Bypass Transport Module moves paper from the stacker to a
third party finishing device (for example, a stitcher). When installed,
the Bypass Transport Module is attached to the stacker module.
Figure 1-16 shows the Bypass Transport Module.
Figure 1-16. Bypass Transport Module and input enablement
device
1 Bypass transport paper output location
2 Input enablement device paper input location
Input enablement device
The input enablement device allows your Xerox DocuPrint 96/
DocuPrint 96MX to support and interface directly with a feeder. As
shown in figure 1-16, it is located on the right side of the feeder/
stacker.