Xerox DocuPrint 96, Руководство оператора

Страница: 256 / 548

STATUS AND PRINT TASKS
8-12 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS OPERATOR GUIDE
Set container size
Use this task to change the maximum paper size allowed in a
container for custom print jobs.
The allowable paper size range is 8 by 10 inches/203 by 254 mm to
11.69 by 17 inches/297 by 432 mm.
Any subsequent pages after the first sheet must be within 25 mm on
each dimension of the first sheet.
You must not set the container size larger than the actual size of the
container.
Note: Once you change a container size using this task, you must
change it back again if you want to use a standard size container.
The following table shows the default size for each container.
Set Container Size Enter the following command:
SET CONTAINER container #,w,l
Table 8-8 lists each parameter and its description.
Table 8-7. Default container sizes
Container
number
Default container size
1 8 by 10.5 inches/203 by 267 mm
2 A4 (210 by 297 mm/8.26 by 11.69 inches)
3 8.5 by 11 inches/216 by 279 mm
4 8.5 by 13 inches/216 by 330 mm
5 8.5 by 14 inches/216 by 356 mm
6 11 by 17 inches/279 by 432 mm or A3
(420 by 297 mm/16.53 by 11.69 inches)
7 10.12 by 14.33 inches/257 by 364 mm
Table 8-8. SET CONTAINER command parameters and
descriptions
Parameter Description
container # The container you want to modify.
w The new width in millimeters.
l The new length in millimeters.