Xerox DocuPrint 96, Руководство по эксплуатации

Страница: 120 / 358

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-42 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS MESSAGE GUIDE
OS1970 FEX exiting. Unable to run during a print job. FCG
exiting. Unable to run during a print job.
(4050/4090/4650 only) The LPS printer is actively running a print job.
Therefore, FEX cannot begin processing your test case job. FCG
verifies that neither the input nor output tasks are active before
beginning its activities. If either input or output is busy processing
data, FCG displays this message.
Action 1. Ensure that the system is idle, then retry FCG.
2. Ensure that the system is idle, then retry FCG.
OS1971 FCG exiting. FCG.Lib not present on the system.
The system cannot find the requested FCG.LIB file which contains
the FCG‘s personality profiles.
Action 1. Verify the .LIB name and retry the command.
2. If the message reappears, contact your supervisor or systems
specialist.
OS1972 FCG exiting: unable to locate: x.
Verify the profile-name and retry the command.
Action If the message appears, contact your supervisor or systems
specialist.
OS1973 FCG exiting. Duplicate profile entries.
The system has found a personality profile-name with the same
name you have specified. This message is followed by message
OS1976 PROFILE NOT LOADED.
Action 1. Verify the profile-name and retry the command.
2. If you get the same message, contact your supervisor or
systems specialist.
OS1974 FCG exiting. Profile for <profile-name>successfully loaded.
FCG has successfully completed its tasks. For example, wire
management with FCG, profile-name would be the FCG WIRE
[parameters] command values you have entered.
Action None.
OS1975 FCG exiting. Unable to communicate with printer.
A connection between FCG and the LPS printer has failed three
times. This message is followed by message OS1976 PROFILE
NOT LOADED. FCG EXITING: UNABLE TO
Action Contact your supervisor or systems specialist.