Xerox DocuPrint 65, Руководство оператора, Страница: 66 / 74

Paper and other stock Operator Guide
3-10 DocuTech 65/DocuPrint 65
Reinforced Mylar
edge
3 or 4 holes
Ringed binders • Load reinforced edge on the
right in Trays 1-4.
• Load reinforced edge on the
left in Trays 5-6.
• Use long-edge feed only.
Card stock Covers, signs • Feed from the Bypass Tray for
best results.
Tabs Separators within
a document • Use the Tab Tray insert.
• Feed from trays 2, 3, and 4
only.
• Load with the tabs on the right.
Transparencies Presentations • Use clear or white-striped
transparencies. Do not use
paper-backed transparencies.
• Feed from the Bypass Tray
(Tray 5) preferred.
• Refer to the label on the tray
for the orientation of striped
transparencies.
• When using transparencies
with removable stripes, load
with the stripe up in Tray 5 and
the stripe down in Tray 1.
• Do not duplex.
Labels Self-adhesive
labels for
envelopes and
packaging • Do not duplex.
• Feed labels into the printer
LEF only.
Labels pose a special problem
because, depending on the
number of labels per sheet,
there is an opportunity for the
label to separate from the
backing while inside the
printer.
• Load face-up in Trays 1-4.
• Load face-down in Trays 5-6.
Table 3-6. Recommendations for loading special stock
Stock Type Common Use Recommendation