MASTER INDEX
processing
input, PD 2-1 to 2-9
multivolume, PD 1-3, 2-27
special features, PR 1-9 to 1-10
production process, PR 1-7
programmable bypass transport, SA 3-6
proportional fonts, FC 1-2 to 1-3
protocol emulation, PD 1-4
PSC command, CR 1-60
PSC, CR 1-60
PSTATUS command, CR 1-60 to 1-62
publications, see documentation
PURGE command, CR 1-62 to 1-63; SA 8-3
PWBAs, CR 1-60
Q
Q-BUS-based, CR 1-39
QWAIT command, CR 4-12
R
RAD50 portion, tape label, CR 1-13 to 1-14
radio communication, OG iv
random mode, graphics, PD 6-2
Raster Image Processor, see RIP
rasterization messages, MG B-30; OG 8-21
RAUX command
definition, PD 4-8
example, PD 4-9
parameter
TEST, PD 4-9
RCU command, CR 1-22, 1-63 to 1-65
RCU, SA 8-3
RDELETE command
definition, PD 4-10
example, PD 4-10
parameter
TEST, PD 4-10
REALLOCATE command, CR 1-65 to 1-66; SA 1-2
RECODE command, CR 3-10
record
defaults, IBMONL, PD 1-4, 2-22
formats, PD 1-1, 1-3
graphics setup, PD 6-3 to 6-7
length, online, PD 1-5 to 1-6
orientation, PD 1-29, 1-31
specification, DJDE, PD 1-32 to 1-33
structure, PD 1-2 to 1-3
RECORD command
definition, PD 2-12
example, PD 2-15 to 2-16
parameters
ADJUST, PD 2-12
CONSTANT, PD 2-12
FORMAT, PD 2-12
LENGTH, PD 2-13
LMULT, PD 2-13
LTHFLD, PD 2-14
OFFSET, PD 2-14
POSTAMBLE, PD 2-14
PREAMBLE, PD 2-14
STRUCTURE, PD 2-15
overriding, PD 1-3
recovery
jobs
automatic, MG B-1 to B-2
offline, MG B-33
online, MG B-32; PD 1-6 to 1-8
power, MG B-31
procedure, OG 8-23 to 8-24
remote devices, FC 3-2
Remote Interactive Communications, SA 3-4
REMOVE command, CR 2-19
RENUMBER command, CR 2-19
REORDER command, CR 3-10 to 3-11
REPLACE command, CR 2-19 to 2-20
replacement hierarchy, commands, PD 1-20 to 1-21
REPORT command, CR 1-7, 1-66 to 1-68;
SA 9-1 to 9-3, 1-2
reports
selecting, OG 4-5 to 4-6
separating, PD 1-5
requirements
cable, IP 1-19 to 1-20
color printing, OG xiii
components, PD 1-25
electrical, IP 1-18 to 1-19
environmental, IP 1-18 to 19
interface, IP 1-22
space, IP 1-5 to 1-13
sysgen
information, SA 1-2 to 1-3
resources, SA 1-1
terminal, IP 1-1
RESET command, CR 1-4, 1-27, 1-68; OG 4-10
resolution, specifying, FC 2-4
responsibilities, IP 1-1 to 1-2, 2-1
restoring
communication, printer, MG B-30 to B-31
files, SA 5-1 to 5-3
system, CR 1-22
Restrict Command Usage, see RCU
restrictions, job parameter, PD 1-35 to 1-37
REVIEW command
editor, CR 2-20
system, CR 1-68 to 1-69
REWIND command, CR 1-4, 1-69
RFEED command
definition, PD 4-11
parameter
TEST, PD 4-11
RIP, FC 2-19; SA 3-6
RNAME command
editor, CR 2-20
system, CR 1-69
ROFFSET command
definition, PD 4-11
example, PD 4-13
CR=Command Reference
FC=Forms Creation Guide
IP=Installation Planning
OG=Operator Guide
MG=Message Guide
PD=PDL Reference
PR=Product Reference
SA=System Administration Guide
XEROX 4050/4090/4450/4650 LPS
MASTER INDEX-13
