Xerox DocuPrint 180 NPS Series, Руководство по планированию установки

Страница: 110 / 172

SUPPLIES
A-4 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
When the printing speed appears to degrade, you may be able to
improve it by running the print job in a higher pitch mode.
Paper size/pitch mode minimum and
maximum
The illustrations in this section show the pitch modes in which you
can operate with the smallest and largest size papers supported by
the 96/4635/180 printer.
Using small paper sizes in 8-pitch mode:
Printing in 8-pitch mode provides the highest throughput speed
available —up to 154 ppm for the 4635 printer and up to 206 ppm for
the 180 printer. (The 96 printer does not support 8-pitch mode.)
However, you should keep the following in mind when you select the
paper you want to use for this mode:
•
Paper sizes smaller than 8 inches / 203 mm are supported only
when the optional 7-inch paper kit is installed on the printer.
•
The leading edge of any paper used in the printer cannot be
less than 10 inches / 254 mm long.
Table A-3. Throughput data: 180 printer
Pitch Paper width Speed
8 7 to 7.4 in. / 178 to 188 mm 206 ppm
7 7.4 to 9.01 in. / 188 to 229 mm 180 ppm
6 9.01 to 10.19 in. / 229 to 259 mm 154 ppm
5 10.19 to 12.12 in. / 259 to 308 mm 128 ppm
4 12.12 to 15.31 in. / 308 to 389 mm 103 ppm
3 15.31 to 17 in. / 389 to 432 mm 77 ppm