May 2004
Simple Scan to Email Setup Guide
Page 11
Use CentreWare Internet Services to Set Up the LDAP Directory
NOTE:
If you do not wish to set up the LDAP directory so you can use your company's
internal address book, proceed to the next section.
When the DC 555/545/535's home page is displayed, select the
Properties
link.
Expand the
Connectivity
and
Protocols
folders and select
LDAP Directory
.
1. Select
IP Address
or
Host Name
and enter the IP address or host name of the LDAP
server. Use the information in item 5 recorded in the "Installation Information" section
earlier in this document. Use the information in item 2 if item 5 is blank.
NOTE:
While entering LDAP Directory settings, click
Restore Settings
to cancel
changes and return to the previous values.
2. See item 6 recorded in the "Installation Information" section earlier in this document. If
you entered a Port other than 389, change the default to match the port number you
recorded.
NOTE:
Windows 2000 Active Directory environments generally use port 3268.
