Xerox DocuColor 7002 Скачать руководство пользователя страница 62

Страница: 62 / 108

Maintenance

DocuColor 7002/8002

9-2

User Guide

Cleaning the Corotrons

Note

Refer to the video located on the Customer Documentation CD as needed.

The Corotrons should be cleaned every day and after 5,000 prints.

Open the Front Doors and slowly pull out the cleaning wand for each corotron fully and
then push the wand back into place.

If it is not seated properly, the User Interface will display the information on the screen. Reseat
the appropriate corotron.

After the corotrons are cleaned, follow the prompts on the UI to record the activity.

CAUTION

If any problems occur while cleaning the pad or re-seating the wand, and/or if the above screen
is continually displayed, call your Xerox service representative for assistance.

Содержание DocuColor 7002













































































































Результаты поиска

Содержание DocuColor 7002

Отзывы:

Похожие инструкции для DocuColor 7002

Бренды по названию

Популярные бренды

Xerox DocuColor 7002, Руководство пользователя

Результаты поиска

Содержание DocuColor 7002

Отзывы:

Похожие инструкции для DocuColor 7002

Бренды по названию

Популярные бренды