Xerox DocuColor 7000AP, Руководство пользователя

Страница: 22 / 88

DocuColor 7000AP/8000AP User Guide 4-4
4. How to clear Jams
1.
Open the Right and Left Front Doors when
directed to by a UI message.
2.
Grasp handle 4 and move it in the direction of
the arrow.
3.
Slowly pull out the Paper Transport module
until it stops.
4. Lift handle 4a and carefully remove all
jammed paper, ensuring that all pieces are
removed if the paper is torn. Turn the green
handle 4b to free any paper that is caught.
5. Reposition green handle 4a.
6.
The Fuser area is on the right hand side of
the Paper Transport module. Lift handle 4c on
the right hand side and pull to open.
7.
Lift up handle 4d until it stops and clear any
jammed paper. Rotate knob 4e in the
direction of the arrow on the knob to clear any
paper that is caught.
Occasionally a sheet of paper wraps around
the heat roll. (The heat roll is visible when
handle 4d is up).
DO NOT
attempt to remove
this sheet of paper because the stripper
fingers may be damaged if you attempt this
procedure. Call your Xerox service
representative to remove this piece of paper.
8.
Reposition green handle 4d and close area
4c. Ensure these are firmly in place.
9.
Grasp handle 4 and slowly push in the Paper
Transport until it stops. Turn the handle in the
direction of the arrow to lock the module in
place.
10.
Close the Right and Left Front Doors.
11.
Follow the instructions on the UI to restart
your print job.
4a
4b
4c
4d
4e