DOCUSP 3.74
3-6
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
PCL Features and Additions
¨
Operators may now save PCL resources on a job-by-job
basis, allowing for more routine saves. Previously, the save
resource function only occurred when the DocuSP controller
was shutdown.
¨
Operators may define the custom stock size for PCL custom
jobs in the job properties. This option introduces the ability
to define any size image for decomposition.
¨
A new check box allows the operator the ability to
automatically center custom sized stock in a manner similar
to the HP product line. When this feature is disabled, the
image is oriented to the side of the paper. This feature
provides HP 8100 bypass tray compatibility.
¨
The default line termination settings for PCL jobs can now
be set on the DocuSP UI. Previously, the line termination
settings had to be changed using a UNIX script.
·
Line termination settings should not be used in a mixed
PCL and ASCII environment, because PCL data
streams can include other line termination escape
sequences which could change the line termination
sequence without the operator’s knowledge.
¨
DocuSP 3.7 now supports HP’s PJL. Key features are
enabled for PJL data streams and include:
·
PJL Set Duplex = Off, On
·
PJL Set Paper = Executive, Letter, A4, Legal, A3,
Ledger, Monarch, DL, C5, COM10, A5, Eurolegal,
14x17, B5, JISB4, JISB5, Hagaki, Ohagaki, ISOB4, and
Custom
·
PJL Enter Language = PCL and PCL XL
·
PJL Set Binding = Longedge, Shortedge
¨
The operator may set the system to ignore PJL commands.
This emulates the behavior of prior releases.
Auto Center TIFF for printing
¨
Operators now have a new System Preference to
automatically center a native TIFF file on a page. The
default setting is uncentered.
¨
This feature does not impact TIFF images wrapped in
PostScript such as DigiPath, GetTiff, or TIFF images fully
embedded in PostScript files.
