Xerox DocuColor 5252, Руководство системного администратора

Страница: 40 / 140

DocuColor 5252 System Administration Guide
2-20
Tools Mode
2
Follow the directions on the screen and touch the button for the
value you wish to adjust.
3
Touch the up or down arrow buttons until the value you want is
displayed in the field above the arrow buttons.
Key point: You should not adjust the value more than 5 counts
at a time.
4
Touch the Enter button on the screen.
5
Repeat steps 2, 3, and 4 to enter other new values.
6
Press the Start button on the Control Panel to enter the new
values into the system.
Key point: It is recommended that you run the Check Gradation
procedure for the screening type that you are adjusting. Do a
before and after comparison to verify your changes.