11
•
Show WebUI Configuration Page -
Allows the System Administrator to enable users who are not authenticated
administrators to view the WebUI Configuration Page. Is accessible by typing
http://{IP
Address}/diagnostics/ShowConfigPage.php
.
•
NTLM v2 Response -
Allows the System Administrator to enable the device to send only the NT Lan Manager (NTLM)
Version 2 protocol (and refuse the LM & NTLM versions). Is accessible by typing
http://{IP
Address}/diagnostics/NTLMSecurity.php
.
•
Custom Size Allowed -
Allows the System Administrator to allow custom size paper to be used for print jobs. Is accessible by
typing
http://{IP Address}/diagnostics/customSizeAllowed.php
.
•
Copies Per Page Print Setting -
Allows the System Administrator to permit the use of the copies per page setting for print
jobs. Is accessible by typing
http://{IP Address}/diagnostics/copiesPerPage.php
.
•
Print Behavior Settings (Suppress Last Blank Page) -
Allows the System Administrator to suppress a last blank page for
print jobs. Is accessible by typing
http://{IP Address}/diagnostics/suppresslastblankpage.php
.
•
Display CAC/PIV Feature -
Allows the System Administrator to enable the display of the CAC/PIV feature. Is accessible by
typing
http://{IP Address}/diagnostics/enableCAC.php
.
•
Install Software (View Scan Templates Created by WIA Driver) -
Allows the System Administrator to install the
#00022121 Network Controller version to view templates created by the Microsoft Windows Image Acquisition (WIA)
driver. Is accessible by typing
http://{IP Address}/diagnostics/00022121.dhtml
. The System Administrator should be
aware that installing this Network Controller version will result in the device no longer being in the certified configuration.
20.
The following pages are available from the Web User Interface with no user login and authentication required:
•
Site Map
- Provides the user with hyperlink pointers to each Web User Interface screen organized by Web UI tab. Is
accessible by selecting the [
Site Map
] button in the upper right hand corner of every Web User Interface page.
•
Exit from Sleep Mode
– Automatically informs the user, when the Network Controller is in ‘Sleep Mode’ at the time the user
attempts to make a change to current settings on a Web User Interface web page, that the Network Controller needs to be
taken out of ‘Sleep Mode’ before the requested changes can be made.
21.
Customers who required specialized changes to support unique workflows in their environment may request specific changes to
normal behavior. Xerox will supply these SPAR releases to the specific customers requesting the change. Please note that in
general enabling a specialized customer-specific feature will take the system out of certified configuration.
Contact
For additional information or clarification on any of the product information given here, contact Xerox support.
Disclaimer
The information provided in this Xerox Product Response is provided "as is" without warranty of any kind. Xerox Corporation
disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular
purpose. In no event shall Xerox Corporation be liable for any damages whatsoever resulting from user's use or disregard of
the information provided in this Xerox Product Response including direct, indirect, incidental, consequential, loss of business
profits or special damages, even if Xerox Corporation has been advised of the possibility of such damages. Some states do no
allow the exclusion or limitation of liability for consequential damages so the foregoing limitation may not apply.
