manualshive.com logo in svg

Xerox Color C75 Press, Руководство пользователя

Поделиться
Скачать
Xerox Color C75 Press Скачать руководство пользователя страница 71

6

Scan

The scan feature supports several methods for scanning and storing an original document.
This machine supports the following scan capabilities:

• Email: Scans a document and sends the scanned data as an e-mail attachment after

converting the data to TIFF, JPEG, PDF, DocuWorks

®

, or XPS (XML Paper

Specification).

• Network Scanning: Scans a document using a job template that was created using

CentreWare

®

 Internet Services (CWIS). When Scan to Home is enabled and the

Remote Access feature is available, the scanned data can be transferred to a different
destination according to an authenticated user.

• Scan to PC: Scans a document and sends the scanned data to a network computer

via the FTP or SMB protocol.

• Store to Folder: Scans a document and saves the scanned data in a folder on the

machine.

• Send from Folder: Scans a document and temporarily saves the scanned data on

the machine. The user is notified by e-mail of the URL to the location where the
scanned data is stored. Then, the user can access the URL to retrieve the scanned
data.

• Store to USB: Scans a document and saves the scanned data to a USB memory

device. (This is an optional feature.)

• Store to WSD (Web Services on Device): You can scan documents set on the machine

and save the scanned data from a computer. Also, you can save the scanned data
to a computer on the network. (This is an optional feature.)

Basic scanning procedure

1. From the machine UI, press the Clear All button.

This clears all previous settings from the machine.

2. Load your original documents either in the document feeder or on the document

glass.

6-1

Xerox

®

 Color C75 Press

User Guide

Содержание Color C75 Press





















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды