manualshive.com logo in svg

Xerox Color C75 Press, Руководство пользователя

Поделиться
Скачать
Xerox Color C75 Press Скачать руководство пользователя страница 189

5. Replace the retard roll using the same technique.

6. Close the bypass tray cover.
7. Verify that the tray is operating correctly by feeding paper from the bypass tray.
8. Either log in as the administrator or ask the administrator to perform the following

steps.
a) On the machine UI, access  Tools  > System Settings  > Common Service Settings

 > Maintenance.

b) Use the up/down arrow buttons to access the last Maintenance screen.
c) Select Technical Key Operator.

The Technical Key Operator feature is displayed.

d) Select the item that corresponds with the newly-replaced components.
e) Select Reset Current Value.
f) When prompted, select the Reset button.

9. Exit administrator mode by pressing the Log In/Out button on the UI.

When prompted, select Logout.

OHCF problem solving

Clearing OHCF jams

Tip

Always ensure that all paper jams, including any small ripped pieces of paper, are cleared
before proceeding with your print jobs.

Note

Remedies differ according to the paper jam location. Follow the instructions displayed
to remove the jammed paper.

13-13

Xerox

®

 Color C75 Press

User Guide

Oversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)

Содержание Color C75 Press





















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды