manualshive.com logo in svg

Xerox Color C75 Press, Руководство пользователя

Поделиться
Скачать
Xerox Color C75 Press Скачать руководство пользователя страница 322

• Close the finisher cover(s).

2.

Follow the instructions shown on the machine UI to resume printing.

3.

If fault persists, power off/on the machine.

4.

If fault persists, call for service.

012-264

Cause:  Finisher jam or fault

Remedy:  Perform the following:

1.

If machine UI continues to reflect a fault/jam, go to the finisher:

• Open the finisher.

• Remove any jams

• Close the finisher cover(s).

2.

Follow the instructions shown on the machine UI to resume printing.

3.

If fault persists, power off/on the machine.

4.

If fault persists, call for service.

012-302

Cause:  Finisher jam or fault

Remedy:  Perform the following:

1.

If machine UI continues to reflect a fault/jam, go to the finisher:

• Open the finisher.

• Remove any jams

• Close the finisher cover(s).

2.

Follow the instructions shown on the machine UI to resume printing.

3.

If fault persists, power off/on the machine.

4.

If fault persists, call for service.

013-100

Cause:  Jam/fault with the SquareFold Trimmer Module

Remedy:  Perform the following:

1.

Open the Top Left and Right Covers of the SquareFold Trimmer Module.

2.

Carefully remove all sheets and paper scraps from jam clearance areas.

3.

Close the SquareFold Trimmer Module Top Left and Right Covers.

4.

Check the Trimmer Waste Container:

• If full, empty the container and reinsert it into the SquareFold Trimmer Module.

• If the container is partially pulled out, push it completely in.

5.

If necessary, follow any remaining instructions on the machine’s UI.

Xerox

®

 Color C75 Press

18-18

User Guide

SquareFold Trimmer Module

Содержание Color C75 Press





















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды