Printer Settings
Phaser® 8400 Color Printer
1-16
Using CentreWare IS
To select Intelligent Ready mode or to schedule warmup/standby settings:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Select
Properties
.
4.
Select the
General
folder on the left sidebar.
5.
Select
Warmup
.
6.
Click the
Warmup Mode
drop-down list and select
Intelligent Ready
,
Scheduled
, or
Job
Activated
.
7.
If you select
Scheduled
in Step 5, make selections for each day’s warmup setting and
standby setting.
8.
Click
Save Changes
at the bottom of the screen.
Note
Although the front panel selections only allow you to turn Intelligent Ready Mode on or
off, CentreWare IS allows you to specify particular printer Warmup Modes and settings.
Accessing Protected Mode Using CentreWare IS
To enter or exit Protected Mode:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Click the
General
folder on the left sidebar, then click
Printer Defaults
.
5.
Click the
Front Panel Menu
drop-down list, then select
On
or
Off.
■
Select
On
to have all menus available.
■
Select
Off
to limit the printer setup items.
6.
Click
Save Changes
at the bottom of the page.
Accessing Load Paper Timeout
When your print job is formatted for a type or size of paper that is not loaded in the printer, the
printer’s front panel displays a message requesting you to load the appropriate paper. The Load
Paper Timeout controls the amount of time the printer waits before printing on another type or
size of paper.
To change the load paper timeout, use either:
■
The printer’s front panel
■
CentreWare IS