Xerox 8254E Скачать руководство пользователя страница 28

Страница: 28 / 244

2 Product Overview

8254E / 8264E User Guide

2.3

Part names and functions

This section explains the name and function of each part.

2.3.1

Printer front

2.3.1.1

8264E Front section

No.

Name

Function

Media loading lever

Used for fixing or releasing media.
•

Lower the lever to fix the media.

•

Lower the lever more to fix the media more firmly. Used to improve the
accuracy of media feeding.

•

Raise the lever to release the media.

Control panel

Used to control operational condition settings and to view printer status and
various function settings.

2.3.4 Printer control panel

Front cover

Used to prevent the user from coming into contact with the driving
mechanism during the printer operation. Opened and closed when media is
set or jammed. It is normally closed.

Stand

Used to support the printer.

Media guide

Used for feeding media smoothly when the media is set or printed.
The After Heater is installed under the guide.

Содержание 8254E





















































































































































































































































Результаты поиска

Содержание 8254E

Отзывы:

Xerox 8254E, Руководство пользователя, Страница: 28 / 244

Результаты поиска

Содержание 8254E

Отзывы: