Configuring SNMP
System Administrator Guide
4-17
■
To add traps for SNMP v1v2c, click the
Add Destination
button, and then go to
Step 3.
■
To edit the settings for a Trap Destination Address, click the corresponding
Edit
button, and then go to Step 3.
■
To delete a Trap Destination Address, click the corresponding
Delete
button.
3.
To add or edit a Trap Destination IP Address, click the
IP Address
radio button, and then
enter the IP Address in the fields.
4.
To add or edit a Trap Destination DNS Name, click the
DNS Name
radio button, and then
enter the DNS Name
in the field.
5.
For a non-standard UDP port, enter the UDP Port Number in the field.
6.
Select the SNMP trap version to send to the specified address. SNMP versions include
SNMP v1 Traps (default), SNMP v2c Traps, and SNMP v2c Inform Requests.
SNMP v1 Traps is the default.
7.
Enter the community name of the destination device in the
Community Name
field.
8.
For
Traps to be received
, select the check boxes of the different types of traps to send to
the specified address. Traps to be received include Printer Traps (default), Job Monitoring
Traps, Cold Start Traps, and Authentication Traps. At least one trap type must be selected.
9.
Click the
Apply
button to save the changes.
Configuring SNMP v3
When configuring SNMP v3, you can set up:
■
Administrative, Key, Any User, and Driver accounts with Privacy and Authentication Keys
associated with each account.
■
SNMP user read and write access.
■
An access control list that limits SNMP printer access to the specific hosts. See
Configuring the SNMP Access Control List
on page 4-19.
To configure and enable SNMP v3:
1.
Launch your web browser.
2.
Enter the printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left sidebar.
5.
Select
SNMP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
On the
SNMP Configuration
page, click the
Configure SNMP v3
button.
8.
Click the
Configure Account(s)
button. A series of pages display that enable you to
configure SNMP v3 and the
Administrative User
,
Key User
, and
Any User/Driver
settings. The first page displays Administrative User account information after the account
has been created.
