4635 LPS ADDITIONAL MESSAGES
1572
Console log path specified in config file invalid
The path specification for console log as denoted in the
configuration file is invalid (doesn't exist).
Action
Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
Messages 3538 through 3579
The following messages (3538 through 3579) are the results of
problems /warnings/status that could occur with the processing
of console log actions and the logging itself.
3538
Insufficient Disk Space to Create Console Log File
Console log cannot be created due to a lack of disk space on
the hard disk.
Action
1. Exit the UI and determine amount of free disk space.
2. Modify CONLOG entry in configuration file to reduce size of
console log to be created, or delete unneccessary items on
hard disk.
3. Select the OK header button to retry the process. If the
problem persists, call Xerox Customer Service.
3539
Creation of Console Log File failed
3540
Read Console Log File Header failed
3541
Write Console Log File Header failed
3542
Reset Console Log File Header failed
For message numbers 3539, 3540, 3541, or 3542, the create,
read, write, or reset console log file operation you have tried has
failed due to a hardware problem.
Action
1. Check disk drive to ensure that DOS formatted console log
disk is inserted in disk drive, if applicable.
2. Select the OK header button to retry the process. If the
problem persists, call Xerox Customer Service to investigate
possible hardware disk failure.
3548
Unable to allocate memory for file view
There is not enough memory to allocate for file view.
Action
1. Ensure that the UI hardware memory is properly configured
and available.
2. Ensure memory is not being committed to other purposes,
like a RAM drive.
3. Select the OK header button to retry the process. If the
problem persists, call Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
15-11