Xerox 6200DX - Phaser Color Laser Printer, Руководство по устранению неисправностей

Страница: 15 / 42

PHASER
®
6200 COLOR PRINTER
Calibrate for Margins
Page 1 of 1
The Calibrate Margins Menu allows you to adjust the printer's imaging area relative to the edges of the paper. The
imaging area is shown as a dashed rectangle; the printer will not print outside this rectangle.
Step 1. Adjust Side 1 Margins. To move the dashed rectangle to the postion you want it on the page:
1. From the printer's front panel Support Menu , scroll to Improve Print Quality? and press OK .
2 . Scroll to the Calibrate Margins Menu and press OK . Select Print Calibrate Margins Page and press OK to print this
page.
3 . To move the dashed rectangle you see on the page printed to the position you want, use the front panel menu
items Adjust Side 1 "A" Margin and Adjust Side 1 "B" Margin as illustrated below.
4. Reprint this page to verify the adjustment.
You can adjust the settings from -40 to +40 units. The thickness of the rectangle's dashed lines is 1 unit. 12 units move
the rectangle 1 mm. The maximum distance the rectangle can be moved (-40 to +40) is 6.7 mm.
Decrease Adjust Side 1 "B"
Margin setting to move left.
Increase Adjust Side 1 "A"
Margin setting to move up.
Increase Adjust Side 1 "B"
Margin setting to move right.
Decrease Adjust Side 1 "A"
Margin setting to move down.
Step 2. If the printer has the duplex option, adjust Side 2 Margins.
1. With Side 1 facing you, hold the print up to a strong light. Note the shadow of the solid lines printed on Side 2.
2. Use the front panel menu items Adjust Side 2 "A" Margin and Adjust Side 2 "B" Margin to move the Side 2 solid
lines until they align with the Side 1 rectangle. Reprint to verify your adjustment.
Phaser 6200 Color Printer
Calibrate Margins
Phaser 7700 Color Printer
Calibrate Margins Phaser 6200 Color Printer
Calibrate Margins
Phaser 6200 Color Printer
Calibrate Margins
B- B+
A+
A-
Phaser 6200
Cal
Phaser 6200
Cal
A
B
A
B
+
-
+
-