Xerox 6110MFP/XN, Сервисная документация

Страница: 223 / 233

Network setup
This chapter gives you step-by-step instructions for setting up your machine for network connections.
This chapter includes:
Introduction
Supported operating systems
Configuring TCP/IP
Setting Ethernet speed
Restoring the network configuration
Printing a network configuration page
Introduction
Once you have connected your machine to a network with an RJ-45 Ethernet cable, you can share the
machine with other network users.
You need to set up the network protocols on the machine to use it as your network printer. Protocols can be
set up by the following two methods:
Via network administration programs
You can configure your machine's print server settings and manage the machine via the following programs
that came with your machine:
SyncThru TM Web Admin Service: A web-based printer management solution for network administrators.
SyncThru
TM
Web Admin Service provides you with an efficient way of managing network devices and lets
you remotely monitor and troubleshoot network printers from any site with corporate intranet access.
SyncThru TM Web Service: Aweb server embedded to your network print server, which allows you to:
- Configure the network parameters necessary for the machine to connect to various network
environments.
- Customize printer, copy, and fax settings.
SetIP: Autility program allowing you to select a network interface and manually configure the addresses
for use with the TCP/IP protocol.
For further details, refer to the user's guide on the network utilities CD that came with your machine.
Via the control panel
You can set up the following basic network parameters through the machine's control panel:
Configure TCP/IP
Configure EtherTalk