Xerox 6110MFP/XN, Сервисная документация

Страница: 15 / 233

Paper Feeding Problems
Paper is jammed
during printing. Clear the paper jam.
Paper sticks together. Ensure that there is not too much paper in the tray. The tray can hold up to
150 sheets of paper, depending on the thickness of your paper.
Make sure that you are using the correct type of paper.
Remove paper from the tray and flex or fan the paper.
Humid conditions may cause some paper to stick together.
Condition Suggested solutions
Multiple sheets of
paper do not feed. Different types of paper may be stacked in the tray. Load paper of only one
type, size, and weight.
If multiple sheets have caused a paper jam, clear the paper jam.
Paper does not feed
into the machine. Remove any obstructions from inside the machine.
Paper has not been loaded correctly. Remove paper from the tray and
reload it correctly.
There is too much paper in the tray. Remove excess paper from the tray.
The paper is too thick. Use only paper that meets the specifications
required by the machine.
If an original does not feed into the machine, the ADF rubber pad may
require to be replaced.
The paper keeps
jamming. There is too much paper in the tray. Remove excess paper from the tray. If
you are printing on special materials, use the mamual tray.
An incorrect type of paper is being used. Use only paper that meets the
specifications required by the machine.
There may be debris inside the machine. Open the front cover and remove
the debris.
If an original does not feed into the machine, the ADF rubber pad may
require to be replaced.
Transparencies stick
together in the paper
exit. Use only transparencies specifically designed for laser printers. Remove each
transparency as it exits from the machine.
Envelopes skew or fail
to feed correctly. Ensure that the paper guides are against both sides of the envelopes.