I n t e r f a c e M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
❖
3-51
The
Ethernet Menu
, a submenu of the
Interface Menu,
Figure 3.13 (page 3-38)
, contains options for configuring the
printer’s Ethernet port,
when the Ethernet option has been
installed
.
The Ethernet option supports the following protocols:
•
Novell NetWare, Version 3.11
•
TCP/IP
•
EtherTalk
•
DEC LAT
•
Microsoft LAN Manager
For detailed information on the supported protocols, refer to
Networking: Ethernet
packaged with the Ethernet option kit.
Figure 3.17 describes each
Ethernet Menu
option. Factory
settings are
boldfaced
and followed by an asterisk (
*
). See
“Setting a Menu Option” (page 3-10)
for the steps to find and
change a setting, or refer to the
Document Services for
Printing Guide
to use the RUI to change settings.
Figure 3.17 Ethernet Menu options showing factory settings
Option
Setting
Description
Port Timeout
5-999 secs (
30*
)
Time interval for determining when to end an
incomplete print job and poll the next port in the
polling sequence.
Port Timeout
works in conjunction with
Auto Job
End
(page 3-53).
See
Appendix C: I/O Port Polling
for more information
on how port polling works.
System Language
PCL*
PostScript
†
†
Appears only when the
PostScript option is
installed.
Page description language (PDL) the printer will use
for print jobs coming through the Ethernet port.
When
Lang. Sensing
(page 3-52) is
On
,
System
Language
is used only when the printer cannot
detect the PDL used in the incoming print job.
Ethernet Menu
Options
AUG-CH03 Page 51 Black,Red,Cyan Friday, February 3, 1995 12:22 AM
