S y s t e m M e n u
C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l
❖
3-59
Auto Continue
Off*
On
Control of the resumption of printing after system
errors occur.
Certain errors may occur that halt printer operations.
Two examples are:
Out of Memory
and
Page Too Complex
.
When
Auto Continue
is
Off
, the printer does not
automatically resume.
Enter
must
be pressed
before normal printer operations can continue.
When
Auto Continue
is
On
, the printer automatically
resumes operation after certain system errors if
Enter
is not pressed within ten seconds
. The
On
setting is useful in a networked environment
.
Print Density
Note: This option is
available for firmware
release 4.0 only. To
determine the firmware
release of your printer,
print a Configuration
Sheet.
0 - 4 (
2*
)
Darkness of the print.
0 is the lightest and 4 is the darkest.
A darker print density uses more toner and may
reduce the life of the EP cartridge.
Figure 3.20 System Menu options showing factory settings
(continued)
Option
Setting
Description
AUG-CH03 Page 59 Black,Red,Cyan Friday, February 3, 1995 12:22 AM
