![background image](http://html1.mh-extra.com/html/xerox/4215-mrp/4215-mrp_reference_3335792026.webp)
HP LASERJET EMULATION MODE
Paper Destination
Purpose
Use this command to specify the paper destination. The printer
supports the HP IIISi implementation of the Paper Destination
command.
Syntax
E
&
#G
where # is one of the values listed in Table 2-4.
Table 2-4.
Paper destinations
#
HP
Printer
equivalent
1
Upper Output Bin
Top Tray
2
Lower
Output Bin
Face-Up Tray
Additional information
The printer lets you select which output tray is used when the HP
Upper Output Bin command is received. You do this with the
Output Destination to Command Assignment feature that you
can select from the control panel. The Output Destination to
Command Assignment feature lets you assign the command to
one of the following output trays:
•
Top tray
•
Face-up tray
•
High-capacity stacker (option)
N
Notes:
•
The high-capacity stacker option allows only letter, executive,
and A4 paper sizes. For all other sizes the default must be
the top tray in this configuration.
•
Any job that is fed from tray 5 is always output to the
face-up tray.
•
The HP Rear Output Bin command is fixed to the face-up tray
destination.
2-6
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE