HP LASERJET EMULATION MODE
Additional information
When a Paper Source command is sent within a print job, the
Input Tray to Command Assignments feature is used. The Input
Tray to Command Assignments feature allows you to select
which tray is used for the HP Upper Tray, Lower Tray, Manual
Envelope Tray, and Paper Deck paper source commands.
When the Xerox printer receives the command
E
&
#H in the
middle of a job, printing stops, the page is ejected, and the next
page feeds as specified by the command.
When the printer receives the paper source command
E
&
0H in
the middle of a job, the current page is ejected and the next
page feeds as specified by the command.
With Auto-Tray switching enabled, if a document with both paper
source and paper size commands requests paper from a tray that
contains a different size of paper from that requested, the printer
automatically selects a paper tray (from trays 4, 1, and 2) with the
correct paper size. If the paper size is not available in any of
these trays, a control panel message prompts you to load the
correct paper size into tray 5. However, you can also use the
control panel to continue printing with the paper size that is
already loaded.
If Auto-Tray switching is disabled, only the selected paper tray is
examined for the correct size. If the paper size is not correct, a
control panel message prompts you to load the correct size.
You again have the option of using the control panel to continue
printing with the wrong size.
Page Size
Purpose
Use the Page Size command to determine the physical size of
paper to use.
Syntax
E
&
#A
where # is one of the values listed in table 2-2.
2-4
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE