HP LASERJET EMULATION MODE
Job Control commands
Job Separation
Purpose
Use the Job Separation command to offset one print job from
others in the output tray.
Syntax
E
&
#T
where # is on of the following:
0
no offset
1
offset output
More
The control panel setting determines how the printer offsets the
output. The following settings are available:
•
On Job—Jobs are offset only.
•
On Job and Copy (default)—All print jobs and sets of
individual copies are offset in the output trays.
•
Disable—The output is not offset unless a Job Separation
command is received requesting an offset output.
Refer to the Xerox MRP Family 4220/MRP, 4230/MRP System
Administrator Guide for more information on offset.
2-2
XEROX MRP FAMILY PCL 5 AND POSTSCRIPT PRINTER LANGUAGE REFERENCE