Xerox 3150 - Phaser B/W Laser Printer, Руководство пользователя

Страница: 18 / 152

I
NTRODUCTION
1.7
1
Cancel( ) button
If the installed toner cartridge is empty, the LED blinks
orange. You must replace it with a new toner cartridge. To
replace the toner cartridge, see “Installing the Toner
Cartridge” on page 2.4.
If you have installed a toner cartridge that is not designed for
the printer, the
LED blinks orange and red in turn. Install
a correct toner cartridge.
If the and LEDs blink, your system has a problem.
To solve the problem, see “Troubleshooting Error Messages”
on page 6.18.
LED Description
Function Description
Printing demo page In Ready mode, press and hold this button for about 2
seconds until all LEDs blink slowly, and release.
Printing configuration
sheets
In Ready mode, press and hold this button for about 6
seconds until all LEDs blink fast, and release.
Printing manually Press this button each time you load paper in the tray
1, when you have selected Tray1(Manual) for
Source from your software application. For detailed
information, see “Using the Manual Feed Mode” on
page 3.12.
Cleaning inside printer In Ready mode, press and hold this button for about
10 seconds until all LEDs turn on, and release. After
cleaning the printer, one “cleaning sheet” (see
page 5.7) is printed.
Canceling print job
Press this button during printing. The LED blinks
while the print job is cleared from both the printer and
the computer, and then the printer returns to Ready
mode. This may take some time depending on the size
of the print job.