Xerox 3100MFPX - Phaser B/W Laser, Инструкция по эксплуатации

Страница: 31 / 36

32
S
ETTINGS
Resetting the handset
When you reset your handset, all the
parameters are reset to their initial value
(factory settings) with the exception of the
phonebook and alarms (birthdays and
organiser).
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET HANDSET . Press Valid. .
Select RESET HANDSET using or .
Press Valid. .
A confirmation screen will prompt you to
confirm your request:
•
To re-initialise your handset, press
Yes .
• If you do not wish to re-initialise your
handset, press No .
To exit the menu, press the red key .
Personal registering
To register a handset in the following cases:
•
the base’s code is no longer 0000 (you
have customised the code),
• you own several bases,
• you want to choose a name for your base
(name displayed on the welcome
screen),
• you want to choose the handset
registration number.
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET HANDSET . Press Valid. .
Select PERSON. REGISTR using or ,
Press Valid. .
Select the required base number. Press
Valid. .
Delete the current base name using C key (if
necessary).
Enter the new name, press Valid. .
Enter the base code. Press Valid. .
The handset enters the registration mode,
"
HANDSET IN REGISTR. MODE " is
displayed on the screen.
Put the base to which you want to register the
handset in registration mode.
Once the handset is registered, select the
required handset number. Press Valid. .
On the multifunction terminal:
Put the terminal in registration mode:
891 - ADVANCED FCT / DECT /
REGISTER
On the machine, press , enter 891 using
the keypad and confirm with OK.
The machine starts searching for the hand-
set.