Petrel-X User Manual 1.1
6
Petrel-X Operating Modes
Powering the Device
The Petrel-X will turn ON as soon as power is given to the device. Due to this, starting or resetting
the device can be achieved by adding batteries and closing the bottom endcap. Once the Petrel-
X is powered, it will flash a green LED for several seconds while initializing. Once initialization is
complete, it will stop flashing. During startup, the Petrel-X will perform a self-test. If the self-test
fails, the unit will flash a self-test error code. See the
information.
In situations where the device is closed and the desired state is
OFF
(for example, during transit)
the magnetic switch can be used. However, be aware that there is still a small amount of power
consumption even when the Petrel-X has been turned off with the magnetic switch. For this
reason, always remove the batteries if the Petrel-X is being stored long-term.
Using the Magnet Switch
The Petrel-X can be turned
ON
and
OFF
using an external magnet near an internal magnetic
switch, located just below the glass. The Petrel-X will flash an LED to indicate its ON/OFF state
after 1-2 magnet swipes near the switch. A
green
LED flash means the unit is ON, a
red
LED flash
means the unit is OFF.
To change the Petrel-X to the opposite ON/OFF state, swipe the magnet repeatedly until the LED
color changes to that of the desired state.
For example, if the unit is currently ON and needs to be turned OFF, swipe the magnet repeatedly
until the LED changes from green (ON) to red (OFF). Once the red LED is seen, the device will
transition to the off state.
Unit Status Indicators
Action: Turn On
Swipe magnet across switch until LED is solid green
Action: Turn Off
Swipe magnet across switch until LED is solid red
The Petrel-X can be turned on or off using the magnet turn-off method any time, regardless of its
current state.