Petrel-X User Manual 1.1
5
Petrel-X Operation
Installation
When installing the Petrel-X there are several factors that can influence performance.
●
The Petrel-X
’s head must be pointing directly upward as much as possible.
●
GPS
and AIS performance may suffer if large angles of the sky and horizon are blocked, such
as if the Petrel-X is next to a wall.
●
Do not use conductive material at the top of the Petrel-X around the glass lens; this will
cause the water sensor to fail.
Operational Tips
●
Connecting power, or power cycling the device will cause the device to restart from the
beginning of its operational cycle.
●
The beacon requires a good view of the sky for any test. It is necessary that any tests be done
outside of a building, far from potential obstructions.
State Diagram
Below is a diagram of the various transitions in the Petrel-X.