Resilient User Manual Version 2.0
23
Other Commands
Below is a list of other commands that can be sent via Iridium or Bluetooth to acquire additional
information, or configure the Resilient. Remember to add the $ symbol ahead of any commands.
Command
Parameters
Description
ver
---
Show hardware and firmware versions.
Status
---
Show operating status
sysInf
---
GPS/Ird summary
FactoryDefaults
---
Reset all to defaults and reset.
btPwr
0/1
Bluetooth power On/Off
btTOut
Insert Name
Bluetooth timeout (Minutes)
btName
X
Set Bluetooth name for the Resilient
btpcycle
---
Power cycle Bluetooth
batt
---
Show battery status
settings
---
Show all settings.
stats
---
Show statistics (since last powerup/reset)
statsL
---
Show Lifetime Statistics
switch
X 0/1
Switch component X on/off. No parameter lists components
MsgEnable
timer# m1,m2,etc
Set & Show which messages are enabled for each Timer.
ReportHour
Hour (0 – 23)
Set/Show Daily Reporting Hour offset from UTC
RepMinute
Minute
Minutes offset past the hour for GPS/Iridium
WCEnable
1/0
Watch Circle Enable/Disable
WCInner
[x]
Watch Circle percent of radius for elevated GPS monitoring
ResetNow
---
Restarts the system. The effect is the same as restarting via
the magnet