Xeos Technologies Inc. Alert Geomatics Xi-100b, Руководство пользователя

Страница: 17 / 33

Xi-100b User Manual Version 4.1 17
RUDICS Tunnel Set-up
Note: The Peripheral device in examples is a Trimble Net-R9 with connection via Ethernet.
The Xi-100b SAT-Comms Modes
SBD Only – A SIM card, even if not using RUDICS, is REQUIRED for Xi-100b’s to work (inherent
with the 9522B modem). This card needs to be activated AT LEAST as a “Register Only” card.
“Register Only” allows the modem it is inside to “Register” with the Iridium network.
Both SBD and RUDICS – where both the SIM is set up for RUDICS, and the modem is active as
well through an Iridium SBD account. Xeos has the ability to provide this service. For the Xi-100b,
it is essential to have this service for command and control of the device, and to initiate RUDICS
sessions.
Interfacing with the Peripheral Device
Connection between the Xi-100b and a peripheral device is dependent upon several items. Most
of these involve the IP setups of both devices; incorrect settings will cause failed connections. It
is suggested that the settings of the device are used to determine the setup of the Xi-100b, as
opposed to the other way around.
IP Relationships:
Item Relationship Net-R9 Name Xi-100 Command Name
IP Address Same subnet IP Address $eip
Netmask Identical Subnet Mask $enmask
Gateway Identical Gateway IP $eRouter
Example – IP Setup Relationships
Item Peripheral Device Xi-100 RUDICS Tunnel
IP Address 192.168.1.131 192.168.1.255 Remote IP
Remote Port 192.168.1.131
Port 80 for TCP
Netmask 255.255.255.0 255.255.255.0 Listen Port Given by Xeos
Gateway IP 192.168.1.2 192.168.1.2 Local Port Given by Xeos
Note: The IP address of the peripheral device is exactly the same as the Remote IP set in the
tunnel.