Xentino SR2 Series, Руководство пользователя

Страница: 35 / 67

SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7
– WWW.XENTINO.COM 35
QoS
QoS is the function to decide the priorities of setting IPs to transfer packets under the situation of
overloading bandwidth. Use QoS to set up for traffic management of the SHDSL.bis router.
General
ADVANCED>QoS>General
General
Item Description
QoS Mode Active QoS for traffic management
Class
Priority for traffic.
Higher class get higher priority, fixed value is 0 to 7.
Scheduling Type
WFQ: schedule traffic by weight field
Strict: schedule traffic by CBS(bytes)/Rate(kbps) field
Strict priority is higher than WFQ.
If setup Strict bandwidth larger than WAN bandwidth, WFQ may get 0 traffic.
Weight Setup weight for WFQ, if scheduling type is strict, this field is no effect.
Rate Mode Enable Rate mode for Rate(kbps), Disable Rate for CBS(bytes)
Rate(kbps) Assign Constant Bit Rate
CBS(bytes) Assign Committed Burst Size
Click on Apply to save the parameters or Cancel to start configuring this page from beginning.