Xentino SR2 Series, Руководство пользователя

Страница: 10 / 67

SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7
– WWW.XENTINO.COM 10
Blink Transmit or received data over LAN 1
Off Ethernet cable isn’t connected to LAN 1
LINK/ACT2
On Ethernet cable is connected to LAN 2
Blink Transmit or received data over LAN 2
Off Ethernet cable isn’t connected to LAN 2
LINK/ACT3
On Ethernet cable is connected to LAN 3
Blink Transmit or received data over LAN 3
Off Ethernet cable isn’t connected to LAN 3
LINK/ACT4
On Ethernet cable is connected to LAN 4
Blink Transmit or received data over LAN 4
Off Ethernet cable isn’t connected to LAN 4
ALM
On All active DSL pairs are connected
Blink
Partial active DSL pairs aren’t connected (250ms on, 250ms
off)
Off No Alarm
Rear Panel
The rear panel of SHDSL.bis router is where all of the connections are made.
Connectors Description of SHDSL.bis Router
DC-IN
LAN (1,2,3,4)
Power adaptor inlet: Input voltage 12VDC
Four Ethernet10/100BaseT auto-sensing and auto-MDI/MDIX for LAN
ports (RJ-45)
CONSOLE RS- 232C (DB9) for system configuration and maintenance
LINE SHDSL.bis interface for WAN port (RJ-45)
RST Reset button for reboot or load factory default
!
The reset button can be used only in one of two ways.
(1) Press the Reset Button for 1 second to make the system reboot.
(2) Pressing the Reset Button for 4 seconds will make the system load the factory default settings and
lose your existing configuration. When you want to change its configuration but forget the user name or
password, or if the product is having problems connecting to the Internet and you want to configure it
again by clearing all configurations, press the Reset Button for 4 seconds with a paper clip or sharp
pencil.