Portable LED Headlight System (L2S14C) www.xenosys.co.kr
13
2.
Charging
The battery is not completely charged on delivery, so charge the battery fully before the
first-time usage.
①
Provide the power after connecting the charger to the cradle.
②
Once the battery is fully charged, the charging signal LED of the charger turn to
“green”.
B. Operating Instructions
1.
Remove the protection cap of LED lens module, and wear the headband by adjusting both
knobs in upper & rear side to fit your head.
2.
Press the power ON/OFF button to turn LED on, and adjust the light position to fit the user.
3.
Turn the intensity change knob to set the brightness. Turn right will increase and turn left decrease
the intensity.
C. Maintenance & Storage after use
1. If the usage is done, press the power ON/OFF button to turn off. Then store it to the case.
Caution – When no-use for long time, make sure to remove the battery from the battery pack.
2. Store LED light in the place free from the air with pressure, temperature, humidity, wind, ray
of light, dirt, salinity, and ion.
3. Store L2S14C in the place free from the declination, shack, and shock.
4. Store L2S14C in the place free from gas, smoke, and chemical fluid.
5. Clean up & wash for next time use.
Caution – External can be cleaned with soft cloth. In case of heavy pollution, try with a bit of
neutral detergent and make sure to NO water or electrolyte flow into the main body.
6. In case of malfunctioning, stop using immediately and contact the dealer.
7. Do not disassemble, repair, or modify the equipment by unauthorized personnel.
Caution- Unauthorized disassemble, repair, or modification are out of warranty.
8. The way to maintain the battery lifespan longer is to exchange fully charged battery before
“beep” sound and the battery alarm sign, and recharge the used battery.
