XENO XDR4 range, Инструкция по установке и эксплуатации

Страница: 10 / 128

9 | Chapter 1 : DVR User Manual
1.3 System Startup and Shutdown
1.3.1 System Startup
After connecting peripheral devices such as cameras, monitors, and a mouse to the DVR, power up the DVR by connecting
DC12V 6.67A adaptor to the power jack on the rear panel. The boot log will display as shown below. Please wait until the boot
process completes.
Login with
„User Name‟ at the login screen, which will appear as shown below.
There is only one Administrator Account configurable in the DVR system. It is assigned with an unchangeable User ID marked
as „admin‟. The default password is empty (No Password). Administrator account has full access to the DVR and its
configurable parameters. The Administrator Account also has the ability to create new users and to assign rights to the new
user accounts. Those new users created by
„admin‟ account can also login with a specific password set by „admin‟ account.
N
OTE Do not forget
the administrator‟s password that was set for the first time. In case the password is lost,
contact your vendor.
N
OTE The mouse is included. In case you need to replace it, it is highly recommended to choose well-known
major brands such as DELL, MICROSOFT, LOGITECH, or SAMSUNG.