Xenarc 892 Series, Руководство по установке

Страница: 7 / 16

7 │ Remote Control
1. Power Button : Turn the monitor ON or OFF.
2. Mirror Button : Enable or Disable the reverse of the display.
3. Dimmer Button : Dim the brightness of the display by pressing this key
continuously to set the brightness level of the display.
( Only available when auto sensor is disabled. )
4. Display Button : Display the current input signal on the screen.
5. Sleep Button : Enable or Disable the sleep timer. Press this button to
select and set the time to turn off the monitor automatically.
6. Picture Button : Enable or select the picture mode you prefer.
Press this button and then you can select standard, mild, user, dynamic.
7. PC auto Button : Enable to adjust the picture automatically, only
available in VGA mode.
8. Menu Button : Enable the OSD menu. Press this button again to exit.
9. Source Button : Enable to switch to different source input.
10 . Up / Down Button ( ▲ / ▼ ) : Navigate Up or Down in OSD menu.
11 . Left / Right Button ( ◄ / ► ) : Navigate Left or Right in OSD menu, as
well as decreasing or increasing the value of setting in OSD.
12. Enter Button : Confirm the setting or selection.