Xenarc 705YV, Руководство по установке

Страница: 14 / 15

1 4 │ A dditional Info
NOTE:
NOTE 1 :
If you are t r ying to connect the monitor to a laptop computer, please
make sure to enable the 15-PIN D-SUB external monitor output located
at the back of your laptop computer. Some laptop computers have
three modes: Laptop D i splay Only, Laptop Display plus External
Monitor, and External Monitor Only. If this is the case, please switch
to the External Monitor Only mode.
NOTE 2 :
Touch Screen device driver must be installed onto your computer in
order for the Touch Screen to become operational. Touch Screen
driver and software for different operating systems can be
downloaded from our website at WWW.XENARC.COM.
NOTE 3 :
The maximum voltage supported by the monitor is 32V DC. Feeding the
monitor with higher voltage will damage the monitor and void the
warranty. Please use a fused power source if you decide to wire the
monitor directly to your car’s electrical system. It is also crucial that
you check the polarity on the connection.
NOTE 4 :
If the monitor is not displaying the V GA signal p roperly, the V GA signal
might be out of range. Please try changing your display refresh rate to
60, 70, 72, or 75 Hertz.
NOTE 5 :
Please note that the LCD screen is made with high-precision
technology. However black points or bright points of light ( red, blue, or
green ) may appear constantly on the LCD screen, and irregular
colored stripes or brightness may appear on the LCD screen.
This is not malfunction. ( Effective dots : more the 99.999% )
For Technical Support , Please contact us at:
Xenarc Technologies Corp.
Toll Free : 888 - 656 - 6536
E - Mail : support @ xenarc.com
Website : www.xenarc.com